User guide

Configuring WLAN Services
4-34 Configuring the Enterasys Wireless Standalone 802.11n AP
ToconfigureDynamicWEPprivacy:
1. ConfigureAuthenticationandAccounting:
•EntertheNASIdentifier.
•EntertheNASIPAddress.
2. ConfigureAuthentication:
•SelectthePrimaryRADIUSServer.
• (Optional)SelecttheSecondaryRADIUSServer.
3. (Optional)SelecttheVSAAttributes—APName,ServiceName,and/orSSID.
4. ClickSavetosaveyourchanges.
Authentication and Accounting
NAS Identifier Enter the identifier for the Network Access Server (NAS). The
NAS identifier is a RADIUS attribute that identifies the server
responsible for passing information to designated RADIUS
servers and then acting on the response returned.
NAS IP Address Enter the IP address of the Network Access Server.
Authentication
Primary RADIUS Server Select the primary RADIUS server.
Secondary RADIUS Server Select the secondary RADIUS server.
Include VSA Attributes
AP Name Select to include the name of the AP in Vendor Specified
Attributes (VSA). VSAs provide information on the identity of the
specific AP that is handling the wireless device, enabling the
provision of location-based services. The AP name is not included
in VSA attributes by default.
Service Name Select to include the WLAN service name in VSA attributes. VSA
provide information on the identity of the specific AP that is
handling the wireless device, enabling the provision of location-
based services. The WLAN service name is not included in VSA
attributes by default.
SSID Select to include the SSID of the AP in VSA attributes. VSA
provide information on the identity of the specific AP that is
handling the wireless device, enabling the provision of location-
based services. The SSID of the AP is not included in VSA
attributes by default.
Function Buttons
Save Click to save your changes.
Delete Click to delete the WLAN service.
Undo Click to display the most recently saved values for the settings on
this screen.
Factory Defaults Click to display the factory defaults on this screen.The factory
defaults are not applied until you click Save.
Field Description