User guide

Configuring WLAN Services
Enterasys Wireless Standalone 802.11n AP User Guide 4-29
ToconfigureaWLANpolicy:
1. Enterameaningfulnamefo
rthepolicy.
2. (Optional)EnableVLANtaggi
ngbyselectingtheVLANTaggedcheckboxandenteringthe
VLANID.
3. ClickSavetosa
veyourchanges.
Configuring WLAN Services
AWLANservicerepresentsalltheRF,authenticationandQoSattributesofawirelessaccess
service.WLANservicesalsoserveasthemeanstoapplyingpolicytoclients.Thissection
describeshowtoconfiguregeneralproperties,privacy,andQoSforaWLANservice.Youcan
createuptosixteenservicesontheAP
,includingWDS.
Note: You must configure at least one WLAN policy before creating and configuring a WLAN
service.
Configuring WLAN Service General Properties
ThissectiondiscusseshowtoconfigurethenameofaWLANservice,enabletheserviceona
radio,associatetheservicewithapolicy,andconfigureadvancedsettings.
Todi
splaythegeneralpropertiesofaWLANservice,navigatetoConfiguration>WLAN
Services,andselecttheserviceyouwanttoeditorselect<AddNew>.TheGeneraltabofthe
WLANservicesconfigurationdisplaysintherightpane.
Delete Click to delete the WLAN policy.
Undo Click to display the most recently saved values for the settings on
this screen.
Factory Defaults
Click to display the factory defaults on this screen.The factory
defaults are not applied until you click Save.
Field Description