User guide

Note: The antenna you select determines the available channel list and the maximum transmitting
power for the country in which the AP is deployed.
Radio and Antenna Configuration
Enterasys Wireless Standalone 802.11n AP User Guide 4-19
4. (Optional)SelecttheUseBroadcastforDisconnectioncheckbox.
5. ClickSavetosa
veyourchanges.
Configuring Individual Radio Settings
ThissectiondiscussestheconfigurationforRadio1andRadio2.Somesettingsarenotavailable
forbothradios.
Note: If this AP is a WDS parent AP, the individual radio settings tab for the WDS radio are
read-only to prevent child APs from losing their connection. The settings for the non-WDS radio can
be edited.
TodisplaythepropertiesforeachRadio,navigatetoConfiguration>WLANRadios,andselect
eithertheRadio1orRadio2tabintherightpane.Theconfigurationfortheselectedradio
displays.
Field Description
Radio Mode Select the 802.11 protocol for th
e radio. The default is off.
Antenna Selection Select the antenna, or antenna combination, that this radio will
use for transmission. The default is left/middle/right.