User guide

Notes:
• You must configure the AP for 802.1x authentication before the AP is connected to an 802.1x
enabled switch port.
• If the switch port to which the AP is connected to is not 802.1x enabled, the 802.1x
a
uthentication will not take effect.
Configuring the LAN Settings
Enterasys Wireless Standalone 802.11n AP User Guide 4-7
Todisplay802.1xPEAPauthenticationsettings,navigatetoConfiguration>LAN>802.1x.The
LAN802.1xconfigurationdisplaysintherightpane.
Field Description
Username Enter the value you want to assign as the user name credential.
Limit is 128 characters. Alphanumeric and special characters are
supported.
Password Enter the value you want to assi
gn as the password credential.
Limit is 128 characters. Alphanumeric and special characters are
supported.
Unmask Click to display the value entered in the Password field.
Function Buttons
Save Click to save your changes.
Undo Click to display the most recently saved values for the settings on
this screen.
Factory Defaults Click to display the fa
ctory defaults on this screen.The factory
defaults are not applied until you click Save.