User guide

Configuring the LAN Settings
Enterasys Wireless Standalone 802.11n AP User Guide 4-5
TodisplaytheSNMPsettings,navigatetoConfiguration>LAN>General.SelecttheEnable
SNMPcheckbox,thenclickConfigureSNMP.TheSNMPconfigurationdialogdisplays.
Field Description
SNMPv3 Configuration
Context String Displays the SNMP context string used to identify this AP to an
SNMP client. This field is read-only and defaults to an empty
string.
Engine ID: Displays the AP’s MAC address. This field is read-only.
SNMP User
User Name Displays the user name. This fie
ld is read-only and defaults to
snmpadmin.
Security Level Select the desired level of security. The Security Level options
include:
•Select au
thpriv (default) to use authentication and data
encryption. Users assigned to this group send SNMP
messages that use a password for authentication and a privacy
key for encryption. If you select authpriv, you must also define
the Authentication Protocol and Privacy Protocol.
•Select a
uthnopriv to use authentication, but no data
encryption. Users assigned to this group send SNMP
messages that use a password for authentication, but not a
privacy key for encryption.
•Select n
oauthnopriv to use no authentication and no data
encryption. Users assigned to this group use no security in
SNMP messages they send to the agent.
Authentication Protocol Select the authentication method. Select either:
•MD5 (d
efault)
•SHA
This drop-down menu is only available if you chose au
thpriv or
authnopriv from the Security Level drop-down menu.