User guide

Creating a WLAN Service
Enterasys Wireless Standalone 802.11n AP User Guide 3-19
Configuring the Radios
Youarerequiredtoconfigureveryfewradiosettingsforbasicoperation,suchasthecountryof
operation,identifyinginstalledexternalantennas(AP3640only),andtheradiomodesforRadio1
andRadio2.ThedefaultsettingsforeachradioaresufficienttoenabletheAPtobeoperational.
Todi
splaytheWLANRadiosconfiguration,navigatetoConfiguration>WLANRadios.The
Commonradiotabdisplaysintheright pane.
Toconfiguretheradiopropertiesrequiredforbasicoperation:
1. Selectthecorr
ectcountryofoperation.
2. Selectthenameoftheactu
alantennaconnectedtotheAPfromeachAntennaTypedrop‐
downmenu(AP3640only).
Caution: Selecting the wrong antenna may cause permanent damage to the AP.
Note: The antenna you select determines the available channel list and the maximum transmitting
power for the country in which the
AP is deployed.
3. ClickSavetosaveyourchanges.