User guide

Configuring the Standalone AP for the First Time
Enterasys Wireless Standalone 802.11n AP User Guide 3-13
TodisplaytheIPaddresssettings,navigatetoConfiguration>LAN>General.TheGeneralLAN
configurationsettingsdisplayintherightpane.
Field Description
General
AP Name Enter a unique name that identifies the AP. The default value is
the AP’s serial number.
AP Contact/Description Enter a brief description that h
elps identify the access point.
Ethernet Port
Ethernet Speed Select the Ethernet Speed from the drop-down menu. Your
options include:
• Au
to (Default)
•10Mbps
• 100Mbps
Ethernet Mode Select either Half-
duplex or Full-duplex (default) from the drop-
down menu. This drop-down menu is not available when
Ethernet Speed is set to Auto.