User guide

Field Description

Upgrade Firmware

File Enter the filename and location of the firmware image to install or

click Browse to navigate to the file.

Browse Click to browse for the location of the firmware file to install.

Download and Reboot Click to download the firmware image from the location specified

the File field. Clicking this button causes the AP to reboot.

Configuring the Standalone AP for the First Time

3-12 Getting Started with your Enterasys Wireless Standalone 802.11n AP

ToupdatetheAPfirmware:

1. ClickBrowsetoopenanavigationwindow

.

2. Selectthefi

rmwarefileandclickOpen.

3. ClickDo

wnloadandReboot.TheAPpromptsyouthatthisactionwillcausetheAPto

reboot.

4. ClickOK.Th

eAPrebootstoimplementthenewcode. 

Configuring the IP Address

Bydefault,DHCPisenabledontheAPandassignsauniqueIPaddresstotheAP.IftheDHCP

serverisnotavailableorifyoudisableDHCP,theAPusesthedefaultIPaddress(192.168.1.20).If

youareusingthedefaultIPaddress,youmustchangeitbecauseonlyoneAPatatimecanusethe

faultIPaddress.

Note: If you are using RADIUS authentication, it is highly recommended that you assign the AP a

static IP address to ensure that the address doesn’t change via DHCP.