User guide

Configuring the Standalone AP for the First Time
Enterasys Wireless Standalone 802.11n AP User Guide 3-11
ToconfiguretheAPpassword:
1. Enterthef
ollowinginformationinthespecifiedfields:
a. EntertheOl
dPassword.
b. EntertheNewPasswor
d.
c. Re‐enterthenewpassw
ordintheConfirmNewPasswordfield.
2. ClickSavetosa
veyourchanges.Thenewpasswordenteredreplacesthepreviouslyused
password.Thesoftwareautomaticallylogsyououtoftheuserinterface.
3. Logint
otheuserinterfaceusingthenewpassword.
Updating the AP Firmware
Thebanneratthebottomoftheuserinterfacescreenidentifiesthecurrentfirmwareversion
runningontheAP.EnterasysNetworksperiodicallyprovidesnewfirmware.Youshouldensure
thatthelatestfirmwareversionisrunningontheAP.
Toviewthelat
estfirmwareavailable,openawebbrowserandnavigatetothefirmwareand
softwarelinkoftheEnterasyssupportpageat:http://www.enterasys.com/support/.Ifthesupport
pageli
stsamorerecentversionoffirmwarefortheAP,youshouldsavethefiletoyour
workstationandupgradetothenewestversion.
Youcanu
pgradetheAPfirmwarefromtheUpgradeFirmwarepageintheWebinterfaceorfrom
thestandaloneAPCLI.ToupgradethefirmwareusingtheCLI,refertotheEnterasysWireless
Standalone802.11nAPCLIReferenceGuide.
Todi
splaytheUpgradeFirmwarewindowinthe Webinterfa ce,navigatetoTools>Firmware.