User guide
Wireless APs 3630 and 3640
C-8 Regulatory Information
Radiotransceiver
• R&TTEDire
ctive1999/5/EC
•ETSI/EN30032
8(2.4GHz)
•ETSI/EN30189
3(5GHz)
Other
• IEEE80
2.11a(5GHz)
• IEEE80
2.11b/g(2.4GHz)
• IEEE80
2.11n(AP3630,AP3640)
• IEEE80
2.3af(PoE)
RoHS
•EuropeanDi
rective2002/95/EC
External Antennas
TheAP3640externalantennaAPcanalsobeusedwithcertifiedexternalantennas.However,in
ordertocomplywiththelocallawsandregulations,anapprovalmayberequiredbythelocal
regulatoryauthorities.
Forali
stofapprovedexternalantennas,seeAP3640ApprovedExternalAntennas.
RFsaf
etydistance
Theantennasus
edforthistransmittermustbeinstalledtoprovideaseparationdistanceofatleast
25cmfromallpersonsandmustnotbeco‐locate doroperat inginconjunctionwithanother
antennaortransmitter.
Conditions of use in the European Community
TheWirelessAPswithinternalandexternalantennasaredesignedandintendedtobeused
indoors.SomeEUcountriesallowoutdooroperationwithlimitationsandrestrictions,whichare
describedinthissection.Itistheresponsibilityoftheendusertoensureoperationinaccordance
withtheserules,frequencies,andtransmitterpo
weroutput.TheWirelessAPmustnotbe
operateduntilproperlyconfiguredforthecustomer’sgeog raphiclocation.
Caution: The user or installer is responsible to ensure that the Wireless AP is operated according
to channel limitations, indoor / outdoor restrictions, license requirements, and within power level
limits for the current country of operation. A configuration utility has been provided with the Wireless
AP to allow the end user to check the configuration and make necessary configuration changes to
ensure proper operation in accordance with the spectrum usage rules for compliance with the
European R&TTE directive 1999/5/EC.