User guide

Enterasys Wireless Standalone 802.11n AP User Guide C-1
C
Regulatory Information
Warning: Warnings identify essential information. Ignoring a warning can lead to problems with the
application.
ThisappendixprovidesregulatoryinformationfortheHiPathWirelessAP3630andAP3640
models.
Notes: Throughout this appendix, the term ‘Wireless AP’ refers to the AP models AP3630 and
AP3640. Specific AP models are only identified in this appendix where it is necessary to do so.
Warning: Changes or modifications made to the Wireless APs which are not expressly approved
by Enterasys could void the user's authority to operate the equipment.
Only authorized Enterasys service personnel are permitted to service the system. Procedures that
should be performed only by Enterasys personnel are clearly identified in this guide.
Note: The Wireless APs are in compliance with the European Directive 2002/95/EC on the
restriction of the use of certain hazardous substances (RoHS) in electrical and electronic
equipment.
Wireless APs 3630 and 3640
ThisdeviceissuitableforuseinenvironmentalairspaceinaccordancewithSection300.22.Cof
theNationalElectricalCode,andSections2‐128,12‐010(3)and12‐100oftheCanadianElectrical
Code,Part1,C22.1.
AP3640 External Antenna AP
Approvedexternalantennas
TheA
P3640externalantennaAPscanalsobeusedwithoptionalcertifiedexternalantennas.Any
unusedantennaportsmustbeterminatedwhenanexternalantennaisusedwiththeAP3640.
Foralis
tofapprovedexternalantennas,see“AP3640ApprovedExternalAntennas”onpageC‐12.
United States
FCC Declaration of Conformity Statement
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwo
conditions:
•Thisde
vicemaynotcauseharmfulinterference.