User guide

Table A-3 LED Patterns for Errors during Initialization
LED 1 LED 2 LED 3 LED 4 State
Blink Red
Tabl e A-4
Solid Green Off Reset to factory defaults
Blink Red
Tabl e A-4
Off Blink Green Failed 802.1x authentication
Blink Red
Tabl e A-4
Blink Green Blink Green Failed DHCP, using Default IP
address
Blink Red
Tabl e A-4
Blink Green Solid Green Failed image upgrade
Table A-4 LED 2 During Normal Operation
LED 2 State
Off No Ethernet Connection
Solid Orange 10 Mb Ethernet Connection
Solid Green 100 Mb Ethernet Connection
Solid Blue 1 Gb Ethernet Connection
LED Behavior
A-6 Troubleshooting
Normal Mode LED Behavior
ThissectiondisplaystheLEDpatternsfortheAPwhenLEDModeissettoNormal.Formore
informationaboutsettingtheLEDmode,see“ConfiguringGe
neralLANSettings”onpage4‐2.
Table A-5
Normal Mode LED Patterns
LED 1 LED 2 LED 3 LED 4 State
Solid Green
Tabl e A-4
Normal Operation using Ethernet
Backhaul
Solid Amber
Tabl e A-4
Normal Operation using WDS
Backhaul
Off Off Off Off No power
Blink Green Blink Green Blink Green Blink Green LEDs in Identify Mode
Identify Mode LED Behavior
ThissectiondisplaystheLEDpatternsfortheAPwhenLEDModeissettoIdentify.Formore
informationaboutsettingtheLEDmode,see“ConfiguringGe
neralLANSettings”onpage4‐2.
Table A-6
Identify Mode LED Patterns
LED 1 LED 2 LED 3 LED 4 State
Blink Green Blink Green Blink Green Blink Green LEDs in Identify Mode