User guide

LED Behavior
Enterasys Wireless Standalone 802.11n AP User Guide A-5
LED Behavior
TheAPhasfourfront‐panelstatusLEDs,asdisplayedinFigureA‐1.
Figure A-1 AP LEDs
LED Initialization Display
Whenpowerisfirstapplied,theAPLEDsdisplaytheinitializationstatus.WhentheAPis
poweredonandwhenitboots,youcanfollowitsprogressthroughtheinitializationprocessby
observingtheLEDsequenceasdisplayedinthefollowingtables.
Table A-1 LED Patterns of a Successful Initialization using Ethernet Backhaul
LED 1 LED 2 LED 3 LED 4 State
Blink Green
Tabl e A-4
Off Off Power-on self test
Blink Green
Tabl e A-4
Blink Green Off Random delay
Blink Green
Tabl e A-4
Off Blink Green 802.1x authentication
Blink Green
Tabl e A-4
Blink Green Blink Green DHCP
TableA‐2displaystheLEDpatternsduringinitializationusingWDSbackhaul.
Table A-2
LED Patterns of a Successful Initialization using WDS Backhaul
LED 1 LED 2 LED 3 LED 4 State
Blink Amber
Tabl e A-4
Off Off Power-on self test
Blink Amber
Tabl e A-4
Blink Green Off Random delay
Blink Amber
Tabl e A-4
Solid Green Off WDS scanning
Blink Amber
Tabl e A-4
Off Blink Green 802.1x authentication
Blink Amber
Tabl e A-4
Blink Green Blink Green DHCP
TableA‐3displaystheLEDpatternsifanyerrorsarereportedduringinitialization.