Specifications

Hardware Specifications
48 Enterasys Xpedition 8000/8600 Getting Started Guide
Preventing Equipment Damage
Observe the precautions listed in this section to prevent accidental damage to the XP
components.
Cautions: To prevent accidental product damage, observe the following precautions:
• Always use proper electrostatic discharge (ESD) gear when handling the control
module, backplane, line cards or other internal parts of the chassis.
• Make sure you allow adequate room for air flow around the chassis.
• If you plan to install the chassis in an equipment rack, it is recommended that you
install a support tray under the chassis, especially for chassis that are completely filled
(no empty control module, power supply, or line card slots).
Hardware Specifications
The following table lists the physical and environmental specifications for the XP-8000
and XP-8600.
XP-8000 XP-8600
Dimensions Inches: 8.27” x 17.25” x 12.25”
Centimeters: 22.23cm x 43.82cm
x 31.12cm
Inches: 8.27” x 17.25” x 19.25”
Centimeters: 22.23cm x 43.82cm
x 48.9 cm
Weight Pounds: 24
Kilograms: 10.8
Pounds: 47
Kilograms: 21.2
Power 100-125 VAC, 5A maximum;
200-240 VAC, 3A maximum
100-125 VAC, 10A maximum;
200-240 VAC, 6A maximum
Operating
temperature
Fahrenheit: 41
o
F to 104
o
F
Centigrade: 5
o
C to 40
o
C
Fahrenheit: 41
o
F to 104
o
F
Centigrade: 5
o
C to 40
o
C