Specifications

Enterasys Xpedition 8000/8600 Getting Started Guide 29
Hardware Overview
Per-port Link • Green – indicates that the port hardware detects a cable
plugged into the port and a good link is established
• Red (intermittent) – indicates that the port received an
error during operation
• Red (solid) – indicates that the port hardware detects a
cable plugged into the port, however, a bad link is
established
• Off – indicates that no link from the port exists
Per-port Rx • Green – indicates when the port’s transceiver receives
packets
• Orange – indicates when the port’s transceiver receives
flow-control packets
Per-port Tx • Green – indicates when the port’s transceiver transmits
packets
• Orange – indicates when the port’s transceiver transmits
flow-control packets
Per-port AN • Green – indicates that the line card has auto negotiated the
operating mode of the link between full-duplex and half-
duplex
• Orange (intermittent) – indicates that auto negotiation is in
process
• Orange (solid) – indicates a problem with auto negotiation
configuration
• Red – indicates an auto negotiation failure. This fault may
occur if the link partner does not support full duplex
• Off – indicates that auto negotiation has been disabled or
the link is down
LED Description