Specifications

Enterasys Xpedition 8000/8600 Getting Started Guide 19
Hardware Overview
Note: The ATM line card supports a various number of physical interfaces (PHY).
Different PHYs can be installed into the ATM line card. The PHY types supported
are: DS-3/T-3, E-3, T-1, E-1, OC-3c MMF, OC-3c SMF, and OC-3c UTP.
The T-Series line cards are considered the next generation line card family for the
Enterasys Xpeditions. The T-Series enhancements are as follows:
• Local hardware routing table support for more than 200,000 routes on each module
• Jumbo frames support up to 64,000 bytes
• Port Rate Limiting and Aggregate Rate Limiting
• Weighted Fair Queuing
• Weighted Random Early Detection
An XP with every slot filled with 4 MB line cards provides 500,000 flows on the XP-8000
and 1,000,000 flows on the XP-8600. An XP with every slot filled with 16 MB line cards
provides 2,000,000 flows on the XP-8000 and 4,000,000 flows on the XP-8600.
10/100Base-TX Line Card
The 10/100Base-TX line card contains eight independent Ethernet ports. Each port senses
whether it is connected to a 10-Mbps segment or a 100-Mbps segment and automatically
T-Series Cards
G8M-PO3B1-04 X X X X X
G8M-PO3B9-04 X X X X X
G8M-P12B1-02 X X X X X
G8M-P12B9-02 X X X X X
G8M-AO3BM-02 X X X X X
G8M-HTXB2-16 X X X X
G8M-GSXB1-02 X X X X X
G8M-GLXB9-02 X X X X X
G8M-GTXB2-02 X X X X X
G8M-GLHB8-02 X X X X X