Datasheet

Completing the Installation
3-32 Installation
Completing the Installation of a DFE-Platinum Module in an
Existing System
In an established DFE-Platinum module system,
• a DFE-Platinum module is already established as the management module,
• the passwords have already been set for various users,
• the system IP address is set, and
• other system parameters have been set.
When you install a new DFE-Platinum module into a system with an existing configured
user account, the current system settings in that account are already recognized by the
new DFE-Platinum module and it will operate accordingly.
If you need to change any settings, you can connect a terminal to the local console port as
described in “Connecting to COM Port for Local Management” on page 3-23 to access
system management, or use a Telnet connection to access the DFE-Platinum module
system management as described in Chapter 3 of the Matrix DFE-Platinum Series
Configuration Guide.
Figure 3-18 Matrix DFE Startup Screen Example (N7 Chassis)
login: admin
Password:
M A T R I X N7
Command Line Interface
Enterasys Networks, Inc.
50 Minuteman Rd.
Andover, MA 01810-1008 U.S.A.
Phone: [phone]
E-mail: [e-mail]
WWW: http://www.enterasys.com
(c) Copyright Enterasys Networks, Inc. 2003
Chassis Serial Number: xxxxxxxxxxxx
Chassis Firmware Revision: xx.xx.xx
Matrix N7(su)->