Datasheet

Connecting to the Network

3-22 Installation

3. Verify that a link exists by checking that the port RX LED is on (flashing amber,

blinking green, or solid green). If the RX LED is off, perform the following steps until

it is on:

a. Verify that the device at the other end of the segment is ON and connected to the

segment.

Figure 3-14 Cable Connection to LC Fiber-Optic Connectors

1 Installed Mini-GBIC LC connector 4 Receive LED (RX)

2 LC cable connector 5 Transmit LED (TX)

3 Release tab