Datasheet

Installing an Optional Mini-GBIC
Matrix DFE-Series Module Installation Guide 3-5
Installing an Optional Mini-GBIC
This section describes how to install a Mini-GBIC in an optional 7G-6MGBIC.
To prepare and install a Mini-GBIC, proceed as follows:
Preparation
Before installing the Mini-GBIC, proceed as follows:
1. Attach the antistatic wrist strap (refer to the instructions in the antistatic wrist strap
package) before removing the Mini-GBIC from the antistatic packaging.
2. Remove the Mini-GBIC from the packaging.
3. If there is a protective dust cover (see 5 in Figure 3-3 or Figure 3-4) on the Mini-GBIC
port, do not remove it at this time.
Warning: Fiber-optic Mini-GBICs use Class 1 lasers. Do not use optical instruments to
view the laser output. The use of optical instruments to view laser output increases eye
hazard. When viewing the output optical port, power must be removed from the network
adapter.
Advertencia: Los Mini-GBICS de fibra optica usan lasers de clase 1. No se debe usar
instrumentos opticos para ver la potencia laser. El uso de los instrumentos opticos para
ver la potencia laser incrementa el riesgo a los ojos. Cuando vean el puerto de la potencia
optica, la corriente debe ser removida del adaptador de la red.
Warnhinweis: Mini-GBICs mit Fiber-Optik Technologie benutzen Laser der Klasse 1.
Benutzen sie keinesfalls optische Hilfsmittel, um die Funktion des Lasers zu überprüfen.
Solche Hilfsmittel erhöhen die Gefahr von Sehschäden. Wenn sie den optischen Port
überprüfen möchten stellen Sie sicher, dass die Komponente von der
Spannungsversorgung getrennt ist.
Caution: Carefully follow the instructions in this manual to avoid damaging the Mini-GBIC,
7G-6MGBIC, and DFE module.
The Mini-GBIC, 7G-6MGBIC, and DFE module are sensitive to static discharges. Use an
antistatic wrist strap and observe all static precautions during this procedure. Failure to do
so could result in damage to the Mini-GBIC, 7G-6MGBIC, and DFE module. Always leave
the Mini-GBIC in the antistatic bag or an equivalent antistatic container when not installed.