Installation guide

Structure of This Guide
xii About This Guide
STRUCTURE OF THIS GUIDE
This guide is organized as follows:
This preface provides preliminary information to aid in using this manual, lists technology and
user guides that may help the user set up and manage the 6H352-25, and gives instructions on how
to get help from Enterasys Networks.
Chapter 1, Introduction, provides an overview of the module and its features.
Chapter 2, Network Requirements, outlines the network requirements that must be met before
installing the module.
Chapter 3, Installation, provides instructions on how to install the 6H352-25, and connect
segments to the module.
Chapter 4, Troubleshooting, describes the function of the LANVIEW LEDs, which can help to
quickly diagnose network/operational problems.
Appendix A, Specifications, contains information on functionality and operating specifications,
connector pinouts, environmental requirements, and physical properties.
Appendix B, Mode Switch Bank Settings and Options, describes how to set the Mode Switch
and install options.
RELATED DOCUMENTS
The following documents may help to set up and manage the 6H352-25:
• MATRIX E7 Series and SmartSwitch 6000 Series Modules Local Management User’s Guide
• MATRIX E7 Overview and Setup Guide
• 6C105 SmartSwitch 6000 Overview and Setup Guide
• Ethernet Technology Guide
• Cabling Guide
• SmartTrunk User’s Guide
• Any applicable HSIM or VHSIM documentation
The manuals listed above can be obtained from the World Wide Web in Adobe Acrobat Portable
Document Format (PDF) at the following site:
http://www.enterasys.com/
NOTE: All documentation for the Enterasys Networks SecureFast VLAN Manager
software is contained on the VLAN Manager CD-ROM.