Specifications

SPECTRUM Software Release Notice (SSRN)
For SPECTRUM 6.6 with Service Pack 5 CD release
Page 54
Document 5156
Cisco Catalyst
Management Module Information
MM Part Number Device(s) Firmware Version
SM-CAT1000 SwCat 1200 4.1, 4.21
SM-CAT1001 HubCat 1400 1.5
SM-CAT1002 HubCat 5xxx 2.1
SM-CAT1006 Catalyst 4xxx NA
SM-CAT1008 Catalyst 85xx NA
Known Anomalies: Cisco Catalyst
Item Description Solution
1 For SwCat1200 models, clicking either
the Clear MAC or Clear Ports button in
the CATStackApp model’s Configuration
view causes a SpectroGRAPH error
message to display.
Use the read/write Community Name
when modeling the device. This clears
and sets all MAC and port counter
attribute values to zero when you click
the Clear Mac or Clear Ports button.
2 In the Device Topology view of the
SwCat5505, reconfigured (swapped)
boards appear in incorrect numeric
order.
This is a firmware issue. The port
information is correct. SPECTRUM reads
the incorrect CATStackMib MIB values
and cannot reorganize or update the
interfaces in a logical order.
3 The Catalyst 8500 model does not
display CAT_IF_Ports.
The device does not support the CISCO-
STACK-MIB.
4 On Catalyst 4000 series devices, VLANs
1002-1005 show up as operational, but
attempts to access them result in an
Authorization Failure trap being sent by
the device.
This is a firmware bug, documented in
Cisco DDTS CSCea42364.