Specifications

SPECTRUM Software Release Notice (SSRN)
For SPECTRUM 6.6 with Service Pack 5 CD release
Page 34
Document 5156
CLI
2 When completing an AutoDiscovery of
2700 routers (that were already active),
AutoDiscovery hung for a few hours after
printing the following message in the
AutoDiscovery GUI: “Model creation
finished: created 1 model”. Java
exceptions were causing the GUI to
hang.
This was resolved by presenting the
errors to the user to ensure he/she
knows the exception has happened and
can then make the choice to either
continue or exit.
3 When changing a Cabletron device
model's community string via Search
Manager, the model information view did
not always populate the change down to
the port and application child models of
the device.
This was resolved by adding
COMMUNITY_STRING to the list of
attributes to roll down to port models for
Cabletron 6xxx_xx, 9xxx_xx, and
2xxx_xx model types. The Cabletron
6000 series model type was also updated
to allow the community string to be
rolled down to application models.
Corrected Issues: CLI
Item Problem Resolution
1 The user was trying to do an update on
action
2162696, and they got a
message after completion, “update:
Failed.” Looking at the action, it
completed successfully, but reported
incorrectly that it failed. This occurred
because SPECTRUM was sending
Cabletron specific action to all devices
when application rediscovery was
invoked.
This was resolved by no longer sending
the Cabletron specific action during
application rediscovery.
2 When trying to update the
ip_address
attribute (
0xc40253) or (0x10e43)
with a value of
0.0.0.0 using CLI
(update), the update command failed
with the following error message
“update: 0.0.0.0: invalid value”. Using
the SpectroGRAPH, however, the user
was able to update the DLCI port ip
address without any errors.
This was resolved by adjusting the code
to allow CLI to update attributes with
0.0.0.0.
Corrected Issues: AutoDiscovery & Modeling
Item Problem Resolution