User`s guide

Configuring Traffic Classes
7-26 Device Control Menu Screens
Figure 7-15 802.1P Port Priority Configuration Screen
7.10.2 802.1P Port Traffic Class Information
This switch provides two priority levels with weighted fair queuing for port egress. This means
that any frames with a default or user priority from 0~3 are sent to the low priority queue “0” while
those from 4~7 are sent to the high priority queue “1” as shown in Figure 7-16.
Parameter Description
Port Numeric identifier for switch port.
Default Ingress User Priority Default priority can be set to any value from 0~7, where 0~3
specifies the low priority queue and 4~7 specifies the high
priority queue.
Number of Egress Traffic Class Indicates that this switch supports two priority output
queues.
802.1P Port Priority Configuration : Port 1 - 12
Port Default Ingress Number of Egress
User Priority Traffic Class
--------------------------------------------------------------
1 0 2
20 2
302
40 2
50 2
60 2
70 2
80 2
90 2
10 0 2
11 0 2
12 0 2
<SAVE> <RETURN> <CANCEL> <PREV PAGE> <NEXT PAGE>
3583_35