User`s guide

Configuring IGMP
7-22 Device Control Menu Screens
7.8 CONFIGURING IGMP
This protocol allows a host to inform its local switch/router that it wants to receive transmissions
addressed to a specific multicast group. Use the IGMP Configuration screen (Figure 7-12) to
configure multicast filtering.
Figure 7-12 IGMP Configuration Screen
NOTE: The default values are shown in Figure 7-12.
Parameter Description
IGMP Status If enabled, the switch will monitor network traffic to
determine which hosts want to receive multicast traffic.
IGMP Status : DISABLED
IGMP Query Count : 5
IGMP Report Delay (Minutes) : 5
<SAVE> <RETURN> <CANCEL>
3583_32