User`s guide

Configuring the Switch
7-2 Device Control Menu Screens
Figure 7-1 Device Control Menu Screen
Selection Description
Port Configuration Sets communication parameters for ports. For details, refer
to Section 7.2.
Port Information Displays current port settings and port status. For details,
refer to Section 7.3.
Spanning Tree Configuration
Menu
Configures the switch, its ports and modules to participate
in a local Spanning Tree. For details, refer to Section 7.4.
Spanning Tree Information
Menu
Displays the current Spanning Tree configuration for the
switch, its ports and modules. For details, refer to
Section 7.5.
Mirror Port Configuration Sets the source and target ports for mirroring. For details,
refer to Section 7.6.
SmartTrunking Configuration Specifies ports to group into aggregate trunks. For details,
refer to Section 7.7.
Port Configuration Extended Bridge Configuration
Port Information 802.1P Configuration
Spanning Tree Configuration Menu 802.1Q VLAN Base Information
Spanning Tree Information Menu 802.1Q VLAN Current Table Information
Mirror Port Configuration 802.1Q VLAN Static Table Configuration
SmartTrunking Configuration 802.1Q VLAN Port Configuration
IGMP Configuration Static Unicast Address Table Configuration
<RETURN>
3583_21