Installation guide

The NAC Controller Initialization Procedure
6-14 Initializing the NAC Controller
Figure 6-19 Select the UTC/Local Hardware Clock Setting
Ifyoursystemhardwareclockissettolocaltime,gotoStep 14. Ifyoursystemhardwareclock
issettoUTC,gotoStep 15.
14. Ifyoursy stemhardwareclockissettolocal,thetimezoneconfigurationscreendisplaysas
displayedinFigure 6‐20.Selectthedesiredtimezoneand
clickOKtoproceed.
Figure 6-20 Timezone Configuraiton
15. AscreenappearsallowingyoutoenableanSNMPdaemon.TomonitortheNAC Controller
usingSNMPclickonYesasdisplayedinFigure 6‐21toproceed,otherwiseclickonNo.Ifyou
clickonNo,thedisplayperformssomeprocessingandreturnstothesystem
prompt.