Specifications

Enterasys Xpedition 2000 Getting Started Guide 57
Loading System Image Software
2. Copy the software upgrade you want to install onto a TFTP server that the XP-2000
can access. (Use the ping command to verify that the XP can reach the TFTP server.)
3. Use the following command to copy the software upgrade onto the internal flash chip
in the XP-2000:
Here is an example:
4. Enter the system image list command to verify that the new image exists on the
internal flash chip, as shown in the following example:
5. Use the following command to select the image file the XP-2000 will use the next time
you reboot the switch.
Here is an example:
6. Enter the system image list command to verify the change.
Note: You do not need to activate this change.
system image add <IPaddr-of-TFTP-host> <image-file-name>
ssr-1# system image add 10.50.11.12 xp2000
Downloading image ’xp2000’ from host ’10.50.11.12’
to local image xp2000 (takes about 3 minutes)
kernel: 100%
Image checksum validated.
Image added.
ssr-1# system image list
Images currently available:
xp2000
system image choose
<file-name>
ssr-1# system image choose xp2000
Making image xp2000 the active image for next reboot