Specifications

Enterasys Xpedition 2000 Getting Started Guide 29
Installing the Hardware
Note: You will probably have to gently push the expansion card’s face plate down
while lining up the first of the screws. The grounding fingers for the
10/100BASE-TX module that sits immediately below the empty expansion
slot protrude upwards to make contact with the bottom of the face plate.
Figure 12. Installing the new face plate (view from inside chassis)
Note: There are two different types of face plates for the expansion modules. There
is a regular face place and an EMI extended face plate. Shown below is a
picture of the EMI extended face plate:
Figure 13. EMI extended face plate