Specifications
Specifications
2 Enterasys Xpedition 2000 Getting Started Guide
The following table lists the basic hardware and software specifications for the XP-2000.
This guide and other XP documentation refers to the XP-2000’s Layer-2, Layer-3, and
Layer-4 switching and routing. These layers are based on the International Standards
Organization (ISO) 7-layer reference model. Here is an example of that model. The XP-
Table 1. Basic hardware and software specifications
Feature Specification
Throughput • 8.0-Gbps non-blocking switching fabric
• 6.0 million packets-per-second routing throughput
Capacity • Up to 16,000 routes
• Up to 128,000 Layer-4 application flows
• Up to 180,000 Layer-2 MAC addresses
• 4,096 Virtual LANs (VLANs)
• 2,000 Layer-2 security and access-control filters
• 3MB input/output buffering per Gigabit port
• 1MB input/output buffering per 10/100 port
Routing
protocols
• IP: RIP v1/v2, OSPF, BGP v2/v3/v4
• IPX: RIP, SAP
• Multicast: IGMP, DVMRP
Bridging and
VLAN protocols
• 802.1d Spanning Tree
• 802.1Q (VLAN trunking)
Media Interface
protocols
• 802.3 (10Base-T/100Base-TX)
Quality of
Service (QoS)
• Layer-2 prioritization (802.1p)
• Layer-3 source-destination flows
• Layer-4 source-destination flows
• Layer-4 application flows
RMON • RMON v1/v2 for each port
Management • SNMP
• Emacs-like Command Line Interface (CLI)
Port mirroring • Traffic from specific ports
• Traffic to specific expansion slots (expansion modules)