Datasheet

CUSTOMER RELEASE NOTES
6/03/2010 P/N: 9038247-01 Subject to Change Without Notice Page: 5 of 13
F0615-O
Soft copies of the C5 CLI Reference are available at no cost on the Enterasys Networks web site,
http://secure.enterasys.com/support/manuals/
The C5 Series of stackable switches is managed by a single IP address for a stack of up to 8 switches.
In order to download the new software to a stack of C5 switches, simply follow the instructions to upgrade a
switch with new software. The system will then automatically download the new software to all the members in the
stack controlled by that stack manager.
Policy Capacities for C5 Only
Feature
Capacity
Policy roles (profiles) per system
63
Number of users per port
Tunnel Mode = 8, Policy Mode = 8, Hybrid Mode = 8
Number of unique rules per system
3072
L3/L4 rules
2048
EtherType rules
512
MAC rules
512
Number of rules per single role
250
Number of masks
No Limit
COS rate limiting (IRL)
Yes
Role-based rate limiting
Yes
Rule-based rate limiting
No
Priority-based rate limiting
No
Fixed rule precedence
Yes
VLAN to policy mapping**
Assign VLAN traffic to use a specific policy
Rule Types
EtherType*
VLAN/cos/drop/forward***
MAC dest / MAC source
Cos/drop/forward
IP Protocol
Cos/drop/forward
IP dest socket / IP source socket
Cos/drop/forward
IP TOS
Cos/drop/forward
TCP dest port / TCP source port
Cos/drop/forward
UDP dest port / UDP source port
Cos/drop/forward
ICMP Type
No
* The EtherType to VLAN mapping rule is supported only when „numusers‟ (number of users allowed to
authenticate on a port) is set to 1.
** The VLAN to policy mapping rule is supported only when „numusers‟ (number of users allowed to authenticate
on a port) is set to 2 or greater.
*** When configuring EtherType to VLAN rules, there is a maximum of 7 VLAN rules per profile.