Network Router User Manual

HARDWARE / FIRMWARE COMPATIBILITY
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 9 of 31
F0615-J
Part Description
Minimum
System
Firmware
Version
Minimum
Boot
Firmware
Version
XP-2-LX70-AA 1-port 70 km 1000BASE-LX module for X-Pedition 2400 E9.0.0.0
XP-2-SER-AA 2-port Serial module (No compression or encryption) for X-Pedition 2400 E9.0.0.0
XP-2-SERC-AA 4-port Serial module with compression (No encryption) for X-Pedition 2400 E9.0.0.0
XP-2-SERCE-AA 4-port Serial module with compression and encryption for X-Pedition 2400 E9.0.0.0
XP-2-SX-AA 2-port 1000BASE-SX module for X-Pedition 2400 E9.0.0.0
XP-2-TX-AA 8-port 10/100 TX module for X-Pedition 2400 E9.0.0.0
XP-PCMCIA-16AT 16MB ATA PCMCIA card for SSR-CM2-64, SSR-CM2-128, SSR-CM3-128, SSR-
CM4-256, ER16-CM3-128, and ER16-CM4-256
E8.2.0.0 E3.1.0.0
XP-PCMCIA-32AT 32MB ATA PCMCIA card for SSR-CM2-64, SSR-CM2-128, SSR-CM3-128, SSR-
CM4-256, ER16-CM3-128, and ER16-CM4-256
E8.2.0.0 E3.1.0.0
XP-PCMCIA-16LN 16MB PCMCIA card for SSR-CM2-64, SSR-CM2-128, SSR-CM3-128, SSR-CM4-
256, ER16-CM3-128, and ER16-CM4-256
3.0.1.6,
3.0.1.7,
3.1.0.8
and up,
excluding
3.2.0.0
E3.0.0.0
The following table lists hardware not supported in this System Firmware release. The last System Firmware
release to support this hardware was series 3.0.X.X.
Part Description
SSR-2-B SSR2000 with 32 MB
SSR-2-B-AA SSR2000 with 32 MB
SSR-CM-128 Control Module 1 with 128 MB memory for SSR8000 and SSR8600
SSR-CM-64 Control Module 1 with 64 MB memory for SSR8000 and SSR8600