User manual

Using the Reset Switch
SecureStack B3 Installation Guide 4-9
Toresettheswitchpassword,refertoFigure 4‐3andproceedasfollows:
1. Press‐and‐holdtheResetswitchwhiletheswi tchdeviceisoperational.Thischangeof
theloginpasswordtothedefaultpasswordwillbeindicatedthroughCLIonly.
2. Logontodevicemanagement.Youcannowlogontotheswitch
throughtheConsole
portandassignanewpasswordusingthecommandlineinterface(CL I ).
3. ToaccessswitchmanagementfromyourlocalPC,terminal,ormodemconnection,
refertotheSecureStackB3ConfigurationGuideforinstructionsonhowtologinand
enteranewpassword.Theguideisavailable
at:
http://www.enterasys.com/support/manuals
Ifyourequireassistance,contactEnterasysNetworksusingoneofthemethodsdescribed
in“GettingHelp”onpage xviii.
Note: Notify the system manager before changing the password.