User manual

The MultiSwitch 700 Device View
2-10 Viewing Device Information
For more information on the port display options available via this menu, see
Selecting a Port Status View, on page 2-12.
The F
DDI Menu
If your MultiSwitch 700 has an installed DELHF-UA, the FDDI menu displays on
the Device View menu bar, with the following options:
• Configuration
• Connection Policy
• Station List
•Performance
• Frame Translation
Refer to Chapter 5, FDDI Management, for information on these menu selections.
The Utilities Menu
The Utilities Menu provides the following options:
• MIB Tools, which provides direct access to the MultiSwitch 700 module’s MIB
information; refer to the Tools Guide for more information.
• RMON utility, a remote monitoring feature that is supported on a per-port
basis when at least one Ethernet or Fast Ethernet module is installed in the
chassis; refer to the RMON User’s Guide for more information.
These selections are also available from the To ol s menu at the top of the primary
NetSight Element Manager window.
The Help Menu
The Help Menu has the following three selections:
• M
IBs Supported brings up the Chassis Manager window. See The Chassis
Manager Window, on page 2-18.
• C
hassis Manager Help brings up a help window with information specifically
related to using the Chassis Manager and Device View windows.
• A
bout Chassis Manager brings up a version window for the Chassis Manager
application in use.
The Module Menu
The Module menu for the MultiSwitch 700 module provides mostly
bridging-related selections, many of which are also available from the Bridge
Status window:
•M
odule Information opens a Module Information window that provides
firmware and manufacturing information which may be useful when
troubleshooting any problems that you are having with the module. For more
information, refer to The Module Information Window, on page 2-19.
• Module Type brings up a window containing a description of the selected
module; see Viewing Hardware Types, on page 2-20.