Switch User Manual

set system name
SecureStack C3 Configuration Guide 3-27
Model Serial # Versions
-------------- ----------------- -------------------
C3G124-48P 001188021035 Hw:BCM5665 REV 17
Bp:01.00.29
Fw:6.03.xx.xxxx
BuFw:03.01.13
PoE:500_3
Table 3‐5providesanexplanationofthecommandoutput.
set system name
Usethiscommandtoconfigureanameforthesystem.
Syntax
set system name [string]
Parameters
Defaults
Ifstringisnotspecified,thesystemnamewillbecleared.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthesystemnametoInformationSystems:
C3(su)->set system name “Information Systems”
Table 3-5 show version Output Details
Output Field What It Displays...
Model Switch’s model number.
Serial # Serial number of the switch.
Versions • Hw: Hardware version number.
• Bp: BootPROM version.
• Fw: Current firmware version number.
• BuFw: Backup firmware version number.
• PoE: Power over Ethernet driver version. (Displays only for PoE switches.)
string (Optional)Specifiesatextstringthatidentifiesthesystem.
Note: A name string containing a space in the text must be enclosed in
quotes as shown in the example below.