Switch User Manual

clear banner motd
3-26 Basic Configuration
C3(rw)->set banner motd "\tThis system belongs to XYZ Corporation.\nUse of this
system is strictly limited to authorized personnel."
clear banner motd
Usethiscommandtoclearthebannermessageofthedaydisplayedatsessionlogintoablank
string.
Syntax
clear banner motd
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearthemessageofthedaybannertoablankstring:
C3(rw)->clear banner motd
show version
Usethiscommandtodisplayhardwareandfirmwareinformation.Referto“Downloadinga
FirmwareImage”onpage3‐32forinstructionsonhowtodownloadafirmwareimage.
Syntax
show version
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplayversioninformation.Pleasenotethatyoumayseedifferent
informationdisplayed,dependingonthetypeofhardware.
C3(su)->show version
Copyright (c) 2007 by Enterasys Networks, Inc.