Switch User Manual

sFlow Configuration clear sflow interface
28-16
None.
Defaults
None.
Mode
Switchmode,read‐only.
Example
Thisexampledisplaystheoutputofthiscommand.Inthiscase,theIPaddressassignedto
loopbackinterface1willbeusedasthe sourceIPaddressofthesFlowAgent.
C3(rw)->show sflow interface
loopback 1 192.168.10.1
clear sflow interface
UsethiscommandtoclearthemanagementinterfaceusedbythesFlowAgentbacktothedefault
oftheHostVLAN.
Syntax
clear sflow interface
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thiscommandreturnsthemanagmentinterfaceusedbythe sFlowAgentbacktothedefaultof
theHostVLAN.
C3(rw)->show sflow interface
vlan 100 192.168.10.1
C3(rw)->clear sflow interface
C3(rw)->