Switch User Manual

show sflow receivers sFlow Configuration
SecureStack C3 Configuration Guide 28-5
show sflow receivers
UsethiscommandtodisplaythecontentsofthesFlowReceiversTable,ortodisplayinformation
aboutaspecificsFlowCollectorlistedinthetable.
Syntax
show sflow receivers [index]
Parameters
Defaults
ThecontentsofthesFlowReceiversTableisdisplayed.
Mode
Switchcommand,read‐only.
Usage
ExecutingthiscommandwithoutspecifyinganindexintothesFlowReceiversTabledisplays
informationaboutalltheCollectorsconfiguredontheswitch.
IfyouspecifyanindividualCollectorbyitsindexnumber,additionalinformationisdisplayedfor
thatCollector.
Examples
ThisexampledisplaysthesFlowReceiversTable.
C3(su)->show sflow receivers
Receiver Owner Time out Max Datagram Port IP Address
Index String Size
-------- -------- ---------- ------------ ----- -------------------
1 ets1 17766 1400 6343 10.1.2.117
2 0 1400 6343 0.0.0.0
3 0 1400 6343 0.0.0.0
4 0 1400 6343 0.0.0.0
5 0 1400 6343 0.0.0.0
6 0 1400 6343 0.0.0.0
7 0 1400 6343 0.0.0.0
8 0 1400 6343 0.0.0.0
set sflow interface 28-14
show sflow interface 28-15
clear sflow interface 28-16
show sflow agent 28-17
For information about... Refer to page...
index (Optional)SpecifiesaspecificCollectortodisplayinformationabout.