Switch User Manual

set tacacs TACACS+ Configuration
SecureStack C3 Configuration Guide 27-3
set tacacs
UsethiscommandtoenableordisabletheTACACS+client.
Syntax
set tacacs {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
TheTACACS+clientcanbeenabledontheswitchanytime,withorwithoutaTACACS+server
online.IftheTACACS+serverisofflineandTACACS+isenabled,theloginauthenticationis
switchedtoRADIUSorlocal,ifenabled.
Examples
ThisexampleshowshowtoenabletheTACACS+client.
C3(rw)->set tacacs enable
show tacacs server
UsethiscommandtodisplaythecurrentTACACS+serverconfiguration.
Syntax
show tacacs server {index | all}
TACACS+ singleconnect state Whether TACACS+ singleconnect is enabled or disabled.
When enabled, the TACACS+ client sends multiple requests over a
single TCP connection.
TACACS+ service The name of the service that is requested by the TACACS+ client for
session authorization. “exec” is the default service name.
TACACS+ session authorization
A-V pairs
Displays the attribute – value pairs that are mapped to the read-only,
read-write, and super-user access privilege levels for the service
requested for session authorization.
The attribute names and values shown in the example above are the
default values.
TACACS+ Server Displays the TACACS+ server information used by the TACACS+
client.
Table 27-1 show tacacs Output Details (Continued)
Output... What it displays...
enable|disable EnablesordisablestheTACACSclient.