Switch User Manual

set pwa enhancedmode
SecureStack C3 Configuration Guide 26-79
set pwa enhancedmode
ThiscommandenablesPWAURLredirection.TheswitchinterceptsallHTTP packetsonport80
fromtheenduser,andsendstheenduserarefreshpagedestinedforthePWAIPAddress
configured.
Syntax
set pwa enhancedmode {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoenablePWAenhancedmode:
C3(su)->set pwa enhancedmode enable
enable|disable EnablesordisablesPWAenhancedmode.