Switch User Manual

show time
3-20 Basic Configuration
Mode
Switchcommand,read‐write.
Usage
Thiscommandresetsallthehightemperatureparameterstotheirdefaultvalues:
•Syslogalertsaredisabledbydefault.
•Trapalertsaredisabledbydefault.
•Overtempthresholdis100%bydefault.
Example
Thisexampleresetsallhightemperatureparameterstotheirdefaults.
C3(su)->clear system temperature
show time
Usethiscommandtodisplaythecurrenttimeofdayinthesystemclock.
Syntax
show time
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaythecurrenttime.Theoutputshowsthedayoftheweek,
month,day,andthetimeofdayinhours,minutes,andsecondsandtheyear:
C3(su)->show time
THU SEP 05 09:21:57 2002
set time
Usethiscommandtochangethetimeofdayonthesystemclock.
Syntax
set time [mm/dd/yyyy] [hh:mm:ss]