Switch User Manual

show maclock
26-58 Authentication and Authorization Configuration
Commands
show maclock
UsethiscommandtodisplaythestatusofMAClockingononeormoreports.
Syntax
show maclock [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,MAClockingstatuswillbedisplayedforallports.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplayMAClockinginformationforge.1.1.
C3(su)->show maclock ge.1.1
MAC locking is globally enabled
Port Port Trap Aging Max Static Max FirstArrival Last Violating
Number Status Status Status Allocated Allocated MAC Address
For information about... Refer to page...
show maclock 26-58
show maclock stations 26-59
set maclock enable 26-60
set maclock disable 26-61
set maclock 26-61
clear maclock 26-62
set maclock static 26-63
clear maclock static 26-63
set maclock firstarrival 26-64
clear maclock firstarrival 26-65
set maclock agefirstarrival 26-65
clear maclock agefirstarrival 26-66
set maclock move 26-66
set maclock trap 26-67
port‐string (Optional)DisplaysMAClockingstatusforspecifiedp ort(s).Fora
detaileddescriptionofpossibleport‐stringvalues,referto“ PortString
SyntaxUsedintheCLI”onpage 7‐1.