Switch User Manual

clear authentication login
SecureStack C3 Configuration Guide 26-5
Syntax
set authentication login {any | local | radius | tacacs}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtosettheauthenticationloginmethodtousethelocalpasswordsettings:
C3(rw)->set authentication login local
clear authentication login
Usethiscommandtoresettheauthenticationloginmethodto thedefaultsettingof “a ny”.
Syntax
clear authentication login
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoresettheauthenticationloginmethod.
C3(rw)->clear authentication login
any Specifiesthattheauthenticationprotocolwillbeselectedusingthe
followingprecedenceorder:
•TACACS+
•RADIUS
•Local
local Specifiesthatthelocalnetworkpasswordsettingswillbeusedfor
authenticationlogin.
radius Specif iesthatRADIUSwillbeusedforauthenticationlogin.
tacacs SpecifiesthatTACACS+willbeusedforauthenticationlogin.