Switch User Manual

Setting the Authentication Login Method
26-4 Authentication and Authorization Configuration
Theundecoratedformatissimplyastringthatspecifiesapolicyprofilename.Theundecorated
formatcannotbeusedformanagementaccessauthentication.
DecoratedFilter‐IDsareprocessedfirstbytheswitch.IfnodecoratedFilter‐IDsarefound,then
undecoratedFilter‐IDsare processed.IfmultipleFilter‐IDsarefound
thatcontainconflicting
values,aSyslogmessageisgenerated.
Setting the Authentication Login Method
Purpose
Toconfiguretheauthenticationloginmethodtobeusedformanagement.
Commands
Thecommandsusedtoconfiguretheauthenticationlog inmethodarelistedbelow.
show authentication login
Usethiscommandtodisplaythecurrentauthenticationloginmethodformanagement.
Syntax
show authentication login
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaythecurrentauthenticationloginmethod.
C3(rw)->show authentication login
Current authentication login is any
set authentication login
Usethiscommandtosettheauthenticationloginmethod.
For information about... Refer to page...
show authentication login 26-4
set authentication login 26-4
clear authentication login 26-5