Switch User Manual

show ipv6 ospf neighbor
25-42 OSPFv3 Configuration
show ipv6 ospf neighbor
ThiscommanddisplaysinformationaboutOSPFv3neighbors.
Syntax
show ipv6 ospf neighbor [interface {vlan vlanid | tunnel tunnelid}] [neighborid]
Parameters
Defaults
Whennoparametersarespecified,informationaboutallneighborsisdisplayed.
Mode
Routerprivilegedexecution:C3(su)‐>router#
Usage
IfyoudonotspecifyaneighborrouterID,theoutputdisplayssummaryinformationinatable.If
youspecifyaninterfaceortunnel,onlytheinformationforthatinterfaceortunneldisplays.
WhenyouspecifyaneighborbyrouterID,detailedinformationabouttheneighbordisplays.
Theinformationisdisplayed
onlyifOSPFv3isenabledandtheinterfacehasaneighbor.
Examples
Thisexampleillustratesthesummaryinformationdisplayedwhennoneighborisspecified.
C3(su)->router#show ipv6 ospf neighbor
Router ID Priority Intf Interface State Dead
ID Time
---------------- -------- ----- ----------- ---------------- ----
3.3.3.3 1 3 Vlan 36 Full/DR 32
6.6.6.6 1 456 Tunnel 0 Full/PtP 31
Table 25‐9providesanexplanationofthecommandoutput.
Invalid OSPF Packet Type Number of packets received with invalid packet type.
Packet Type / Sent / Received Columns listing packet types and number of packets sent and
received per type.
Table 25-8 show ipv6 ospf interface stats Output Details
Output Field What It Displays...
interface (Optional)Restrictstheoutputdisplaytoaspecificinterface.
vlanvlanid SpecifytheVLANinterfacetodisplayinformationabout.
tunneltunnelid Specifythetunnelinterfacetodisplay
neighborid (Optional)SpecifytheneighborbyitsrouterID,specifiedin32‐bit
dottedquadformat.