Switch User Manual

show ipv6 ospf interface stats
25-40 OSPFv3 Configuration
show ipv6 ospf interface stats
Thiscommanddisplaysstatisticsforaspecificinterface.StatisticsaredisplayedonlyifOSPFv3is
enabled.
Syntax
show ipv6 ospf interface stats vlan vlanid
Parameters
Defaults
None.
Mode
Routerprivilegedexecution:C3(su)‐>router#
Example
ThisexampleshowshowtodisplaystatisticsforVLAN80.
C3(su)->router>show ipv6 ospf interface stats vlan 80
OSPFv3 Area ID 0.0.0.20
Spf Runs 7
Area Border Router Count 0
AS Border Router Count 0
Area LSA Count 5
IPv6 Address FE80::211:88FF:FE56:5D8F/128
OSPF Interface Events 2
Virtual Events 0
Neighbor Events 0
External LSA Count 1
LSAs Received 1903
Originate New LSAs 4198
Sent Packets 1053
Metric Cost The priority of the path. Low costs have a higher priority than high
costs.
OSPF MTU-ignore Whether to ignore MTU mismatches in database descriptor
packets sent from neighboring routers. The following information
only displays if OSPF is initialized on the interface:
OSPF Interface Type Broadcast LANs, such as Ethernet and IEEE 802.5, take the value
broadcast. Tunnel interfaces take the value point-to-point.
State The OSPF Interface States are: down, loopback, waiting, point-to-
point, designated router, and backup designated router.
Designated Router The router ID representing the designated router.
Backup Designated Router The router ID representing the backup designated router.
Number of Link Events The number of link events.
Table 25-7 show ipv6 ospf interface Command Output Details (Continued)
Output Field What It Displays...
vlanvlanid SpecifiestheVLANinterfaceforwhichtodisplaystatistics.