Switch User Manual

show ipv6 ospf database
25-34 OSPFv3 Configuration
show ipv6 ospf database
Thiscommanddisplaysinformationabouttheli nkstatedatabasewhenOSPFv3isenabled.
Syntax
show ipv6 ospf [ areaid] database [{external | inter-area { prefix | router} | link |
network | nssa-external | prefix | router | unknown {area | as | link}}]
[lsid] [{adv-router [rtrid] | self-originate | database-summary}]
Parameters
Defaults
Ifnoparametersareentered,LSAheadersforallareasaredisplayed.
Mode
Routerprivilegedexecution:C3(su)‐>router#
Usage
Ifyouexecutethiscommandwithoutanyparameters,LSAheadersforallareasaredisplayed.Use
theareaidparametertodisplaydatabaseinformationforaspecificarea.Theotheroptional
parameterscanbeusedtospecifyaparticulartypeoflinkstateadvertisementtodisplay.
Examples
ThisexampledisplaystheoutputwhenanareaIDisspecified.
C3(su)->router#show ipv6 ospf 10 database
Inter Network States (Area 0.0.0.10)
areaid (Optional)Displaydatabaseinformationaboutaspecificarea.Enterthe
areaIDinIPaddressformat(dotted‐quad)orasadecimalvalue.
external (Optional)DisplayexternalLSAs.
inter‐area (Optional)Displayinter‐areaLSAs.
prefix (Optional)Displayintra‐areaPrefixLSAs.
router (Optional)DisplayrouterLSAs.
link (Optional)DisplaylinkLSAs.
network (Optional)Displaynetwork
LSAs.
nssa‐external (Optional)DisplayNSSAexternalLSAs.
unknown
{area|as|link}
(Optional)Displayunknownarea,unknownAS,orunknownlink
LSAs.
lsid (Optional)SpecifiesthelinkstateID.
adv‐router[rtrid] (Optional)DisplaytheLSAsthatarerestrictedbytheadvertisingrouter.
Optionally,specifytherouterbyitsrouterID
(rtrid),enteredasa32‐bit
dotted‐quadvalue.
self‐originate (Optional)DisplayLSAsthatareself‐originated.
database‐summary (Optional)DisplaysthenumberofeachtypeofLSAinthedatabaseand
thetotalnumberofLSAsinthedatabase.