Switch User Manual

ipv6 ospf transmit-delay
SecureStack C3 Configuration Guide 25-27
Parameters
Defaults
Defaultvalueis4seconds.
Mode
Routerinterfaceconfiguration:C3(su)‐>router(Config‐if(Vlan1))#
Usage
Theretransmitintervalisthenumberofsecondsbetweenlink‐stateadvertisement
retransmissionsforadjacenciesbelongingtothisrouterinterface.Thisvalueisalsousedwhen
retransmittingdatabasedescriptionandlink‐staterequestpackets.
Usethenoformofthiscommandtoresettheretransmitintervaltothedefaultvalueof
4seconds.
Example
Thisexamplesetstheretransmitintervalto10secondsforrouterinterfaceVLAN7.
C3(su)->router(Config)# interface vlan 7
C3(su)->router(Config-if(Vlan 7))# ipv6 ospf retransmit-interval 10
ipv6 ospf transmit-delay
ThiscommandsetstheOSPFv3transmitdelayfortherouterinterface.
Syntax
ipv6 ospf transmit-delay seconds
no ipv6 ospf transmit-delay
Parameters
Defaults
Defaultvalueis1second.
Mode
Routerinterfaceconfiguration:C3(su)‐>router(Config‐if(Vlan1))#
Usage
Thetransmitdelay,specifiedinseconds,setstheestimatednumberofsecondsittakestotransmit
alinkstateupdatepacketoverthisinterface.
Usethenoformofthiscommandtoreturnthetransmitdelaytothedefaultvalueof1seconds.
seconds Specifiestheretransmitintervalvalue,whichcanrange
from0to3600
seconds.
seconds Specifiesthetransmitdelay,whichcanrangefrom1to3600seconds.