Switch User Manual

show ip address
3-10 Basic Configuration
show ip address
UsethiscommandtodisplaythesystemIPaddressandsubnetmask.
Syntax
show ip address
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaythesystemIPaddressandsubnetmask:
C3(su)->show ip address
Name Address Mask
---------------- ---------------- ----------------
host 10.42.13.20 255.255.0.0
clear summertime 3-24
set prompt 3-24
show banner motd 3-25
set banner motd 3-25
clear banner motd 3-26
show version 3-26
set system name 3-27
set system location 3-28
set system contact 3-28
set width 3-29
set length 3-29
show logout 3-30
set logout 3-30
show console 3-31
set console baud 3-31
For information about... Refer to page...