Switch User Manual

area virtual-link transmit-delay
25-20 OSPFv3 Configuration
Defaults
Thedefaultretransmitintervalis5seconds.
Mode
RouterOSPFv3configuration:C3(su)‐>router(Config‐router)#
Usage
Usethenoformofthiscommandtoreturnaconfiguredvaluetothedefaultvalueof5seconds.
Example
Thisexamplesetstheretransmitintervalto10secondsforthespecifiedOSPFv3virtualinterface.
C3(su)->router(Config-router)# area 20 virtual-link 2.2.2.2 retransmit-interval
10
area virtual-link transmit-delay
ThiscommandconfiguresthetransmitdelayforthespecifiedOSPFv3virtualinterface.
Syntax
area areaid virtual-link neighborid transmit-delay seconds
no area areaid virtual-link neighborid transmit-delay
Parameters
Defaults
Thedefaulttransmitdelayis1second.
Mode
RouterOSPFv3configuration:C3(su)‐>router(Config‐router)#
Usage
Usethenoformofthiscommandtoresetthetransmitdelaytothedefaultof1second.
Example
Thisexamplesetsthetransmitdelayto2secondsforthespecifiedOSPFv3virtualinterface.
C3(su)->router(Config-router)# area 20 virtual-link 2.2.2.2 transmit-delay 2
areaid SpecifiestheareaIDinIPaddressformat(dotted‐quad)orasadecimal
value.
neighborid SpecifiesthevirtuallinkneighborbymeansofitsrouterID.Therouter
IDmustbeenteredin32‐bitdotted‐quadnotation.
seconds Specifiesthevalueofthetransmitdelayinseconds.Therangeis
from1
to3600seconds.