Switch User Manual

area virtual-link hello-interval
SecureStack C3 Configuration Guide 25-19
area virtual-link hello-interval
ThiscommandconfiguresthehellointervalforthespecifiedOSPFv3virtualinterface.
Syntax
area areaid virtual-link neighborid hello-interval seconds
no area areaid virtual-link neighborid hello-interval
Parameters
Defaults
Thedefaulthellointervalis10seconds.
Mode
RouterOSPFv3configuration:C3(su)‐>router(Config‐router)#
Usage
Usethenoformofthiscommandtoreturnaconfiguredvaluetothedefaultvalueof10seconds.
Example
Thisexampleconfiguresahellointervalof30secondsforthespecif iedOSPFv3virtualinterface.
C3(su)->router(Config-router)# area 20 virtual-link 2.2.2.2 hello-interval 30
area virtual-link retransmit-interval
ThiscommandconfigurestheretransmitintervalforthespecifiedOSPFv3virtualinterface.
Syntax
area areaid virtual-link neighborid retransmit-interval seconds
no area areaid virtual-link neighborid retransmit-interval
Parameters
areaid SpecifiestheareaIDinIPaddressformat(dotted‐quad)orasadecimal
value.
neighborid SpecifiesthevirtuallinkneighborbymeansofitsrouterID.Therouter
IDmustbeenteredin32‐bitdotted‐quadnotation.
seconds Specifiesthevalueofthehellointervalinseconds.Therangeis
from1
to65535seconds.
areaid SpecifiestheareaIDinIPaddressformat(dotted‐quad)orasadecimal
value.
neighborid SpecifiesthevirtuallinkneighborbymeansofitsrouterID.Therouter
IDmustbeenteredin32‐bitdotted‐quadnotation.
seconds Specifiesthevalueoftheretransmitintervalinseconds.Therangeis

from1to3600seconds.